Why Is Gas Fire Extinguishing Device Installed In Computer Room?

Why is a gas fire extinguishing device installed in the computer room?

According to fire regulations, a gas fire extinguishing system must be added to the computer room. Relevant data shows that a fire in the computer room not only causes casualties, but also causes the loss of data on the host and the obstruction of network communication. Its harm is far greater than we imagined.

The computer room is a place where fires are easy to occur, so the requirements for safety facilities protection are very strict.

Why is the computer room prone to fire?

First, let's understand the multiple causes of fire in the computer room: the spatial structure in the computer room is divided into three layers: under the ceiling, under the floor, and between the ceiling and the floor. The main cause of fire in the computer room is generally caused by electrical overload or short circuit. The main burning area is generally on the floor or ceiling. In the early stage of burning, only thick smoke will be emitted because the temperature rises relatively slowly; cable problems in the computer room, and the bad wires in the computer room are not handled in time, which can also cause fires.

In addition, there are some other reasons. A fire in a computer room usually starts at a certain point. If the fire can be extinguished in time, the fire can be prevented from spreading. However, for a place like a computer room, we need to consider how to extinguish the fire while ensuring that there is no damage to the machinery and equipment. However, general fire extinguishing methods will not work. A gas fire extinguishing system such as HFC-227ea can do this. It can automatically start the fire extinguishing system based on temperature sensing or smoke sensing before the fire, realize automatic alarm and automatic fire extinguishing, and it does not harm the environment or equipment.